Make sure you place the long edge of the slide in the film holder as shown above.
Make sure you removed the document mat. See Removing the Document Mat.
Close the scanner cover.
To scan your film, see Using the Scanner Buttons.
When you are finished scanning slides, be sure to replace the document mat before scanning documents or photos. See
Replacing the Document Mat.
Top
Storing the Film Holder
When you are not using the film holder, you can store it inside the scanner cover.
Open the scanner cover and remove the document mat. See Removing the Document Mat for details.
Slide the film holder into the scanner cover.
Replace the document mat. See Replacing the Document Mat for details.
Top
Replacing the Document Mat
Replace the document mat by sliding it into the notches in the scanner cover. Make sure the white surface faces
outwards.
To Next Page
Loading...
