Epson PERFECTION V700 PHOTO User Manual (English)

Other manuals for Epson PERFECTION V700 PHOTO

User Guide157 pages

Service Manual90 pages

Qucik Start1 page

Quick Start4 pages

Specifications4 pages

Questions and Answers:

J
jodismithAug 12, 2025
What to do if the Carriage Unit does not operate on my Epson PERFECTION V700 PHOTO?
- C
  Christopher JohnsonAug 12, 2025
  If the carriage unit on your Epson scanner isn't operating, start by ensuring that the carriage lock has been released. Also, check that the upper housing is correctly installed. If these steps don't solve the problem, it may be due to a Carriage Mechanism or CR Motor failure, or potentially a Main Board failure, all of which would require replacing the respective components.
R
ryan83Aug 16, 2025
Why Epson Scanner main unit does not operate when powered-on?
- A
  alexander04Aug 16, 2025
  If your Epson scanner's main unit isn't operating when powered on, it could be due to a disconnected connector; ensure all connectors are properly connected. If the issue persists, it might indicate a CR Motor or Main Board failure, requiring replacement of the affected part.
O
osimmonsAug 19, 2025
Why TPU Carriage Unit does not operate on Epson PERFECTION V700 PHOTO?
- D
  david71Aug 20, 2025
  If the TPU carriage unit on your Epson scanner is not operating, check the following: 1. Ensure the OPTION Connector CN7 on the main unit and the DRV Board Connector CN2 are connected with the TPU Unit cable. 2. Verify that the TPU Carriage Lock has been released. 3. Confirm the TPU Lower Housing is correctly installed. If the issue continues, it may be due to a failure of the TPU Carriage Mechanism, TPU CR Motor, DRV Board, or Main Board, each requiring replacement.
M
Melissa WilliamsAug 25, 2025
How to fix Epson Scanner image quality error?
- M
  Mr. Charles WilliamsAug 25, 2025
  If you're experiencing issues with the quality of your scanned images, it might be due to a few reasons. First, check if the document glass is clean, as white spots on the image often indicate it needs cleaning. If cleaning doesn't resolve the issue, it could be due to ISN Board or Main Board failure, requiring replacement of the Carriage Unit or the Main Board, respectively.
K
Karen CobbAug 27, 2025
How to resolve Epson PERFECTION V700 PHOTO interface error?
- R
  Robin FosterAug 27, 2025
  To resolve an interface error on your Epson scanner, first, verify that your host computer supports USB 2.0 or IEEE 1394. If it does, ensure the TWAIN Driver for the scanner is correctly installed; reinstall it if necessary. Also, check the USB 2.0 or IEEE 1394 cables for damage and replace them if needed. If the problem continues, the Main Board may need to be replaced.
J
Jose WalkerAug 31, 2025
What causes the fluorescent lamps not to light up on my Epson PERFECTION V700 PHOTO?
- S
  Sarah MooreAug 31, 2025
  If the fluorescent lamps on your Epson scanner aren't lighting up, the Carriage FFC might not be connected to the Connector CN5 on the Main Board; ensure it's properly connected. If the issue persists, it could be due to a Carriage Unit or Main Board failure, requiring replacement.
E
Emily BrownSep 4, 2025
What to do if the Fluorescent Lamps of the TPU do not light up on Epson PERFECTION V700 PHOTO Scanner?
- A
  Amy KempSep 4, 2025
  If the fluorescent lamps of the TPU on your Epson scanner do not light up, check these connections: 1. Ensure the OPTION Connector CN7 on the main unit and the DRV Board Connector CN2 are connected with the TPU Unit cable. 2. Verify the Lamp Connector is connected to Connectors CN2 and CN3 on the TPU Inverter Board. 3. Confirm Connector CN1 on the TPU Inverter Board and Connector CN3 on the SUB_B Board are connected with the cable. 4. Check that the DRV-SUB_B FFC is connected to Connector CN1 on the SUB_B Board and Connector CN4 on the DRV Board. If problems persist, consider replacing the TPU Inverter Board, DRV Board, or Main Board.
R
Robert HaneySep 7, 2025
Why the TPU LEDs do not light up on Epson PERFECTION V700 PHOTO Scanner?
- D
  Dale CookSep 7, 2025
  If the TPU LEDs on your Epson scanner do not light up, ensure the DRV-SUB_B FFC is connected to Connector CN1 on the SUB_B Board and Connector CN4 on the DRV Board. Also, check that Connectors CN2 and CN4 on the SUB_B Board are connected. If the LEDs still don't light up, it may indicate a failure of the SUB_C Board and the SUB_D Board, or a DRV Board or Main Board failure, requiring replacement of the respective components.

Epson PERFECTION V700 PHOTO Specifications

General

I/O ports	USB
Dimensions (WxDxH)	503 x 308 x 152.5 mm
Power requirements	220-240V 50-60Hz
Film scanning	No
Color scanning	Yes
Input color depth	48 bit
Maximum scan size	216 x 297 mm
Scanner type	Flatbed scanner
Sensor type	CCD
Compatible operating systems	Microsoft Windows 98 SE/ME/2000 Professional/XP Home Edition/XP Professional x64 Edition Mac OS X 10.2
Power consumption (typical)	32 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 80 %
Pallet width	1200 mm
Pallet height	1000 mm
Pallet length (UK)	1950 mm
Quantity per pallet	20 pc(s)
Quantity per pallet (UK)	24 pc(s)
Quantity per pallet layer	5 pc(s)
Quantity per pallet layer (UK)	6 pc(s)
Package depth	625 mm
Package width	250 mm
Package height	450 mm
Package weight	9488 g
Quantity per pack	1 pc(s)
Country of origin	China