138
Setting Options Description
Operation Direct Power On
High Altitude Mode
Auto Source Search
Auto Power On
HDMI EQ Setting
Selects various operation options
Direct Power On: turns on the projector when
you plug it in
High Altitude Mode: regulates the projector’s
operating temperature at altitudes above 4921
feet (1500 m)
Auto Source Search: automatically detects
the image signal being input when the
projector is turned on
Auto Power On: automatically turns on the
projector when it receives an image signal
(available only when Standby Mode is set to
Communication On)
HDMI EQ Setting: adjusts the HDMI input
signal level depending on the connected
device
A/V Settings A/V Output
Audio Output
HDMI Audio Output
Selects the following when the projector is in
standby mode (turned off) and the Standby
Mode setting in the ECO menu is set to
Communication On:
A/V Output: Always On outputs sound and
images to external equipment when the
projector is turned off
Audio Output: selects the audio source for
sound; Auto outputs sound from the last
selected image source
HDMI Audio Output: selects the audio source
for HDMI images
Projector ID Off
1 through 9
Sets the projector to a particular ID number
which allows you to use a remote control to
individually control projectors
To Next Page
Loading...
Need help?
General