Why can't I monitor my Epson Software projector in standby mode?
To monitor and control the Epson projector using EasyMP Monitor when it's in standby mode, ensure the projector's Standby Mode is set to Communication On (or Network On), or that Network Monitoring is set to On within the configuration menu.
What to do if an e-mail message is not sent when a problem occurs with an Epson Software projector?
If you are not receiving email notifications when there's an issue with your Epson projector, verify that the SMTP server IP address, Port Number, and Recipient mail address have all been entered correctly in the settings.
General| Contrast Ratio | 15, 000:1 |
|---|---|
| Display Technology | 3LCD |
| Noise Level | 37 dB (Normal Mode), 29 dB (ECO Mode) |
| Resolution | 1024 x 768 (XGA) |
| Projection Distance | 1.1 - 10.9 m |
| Inputs | HDMI, VGA, USB, Composite |
| Video Modes | NTSC, PAL, SECAM |
| Data Modes | SVGA, XGA, SXGA, UXGA |
| Lamp Type | UHE |
| Aspect Ratio | 4:3 (Native), 16:9 |
| Projection Size | 30 inches - 350 inches |
| Output Ports | VGA |
To Next Page
