EasyManuals Logo

Epson PowerLite 1260 Installation Handbook

Epson PowerLite 1260
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION
HANDBOOK
Maintenance
1
Epson PowerLite 1220 / 1260
Replacing the Lamp
The life span of the projection lamp is about 4,000 hours if Power
Consumption
in the Settings menu is Normal (default), and 5,000
hours if this setting is
ECO. See page 88 to check the lamp usage.
It is time to replace the lamp when:
The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen and the
Lamp light flashes orange. To maintain projector brightness
and image quality, replace the lamp as soon as possible.
note
Turn off this product when
not in use to prolong the life
of the projector.
You may also need to replace the lamp if the Lamp light flashes
red. See page 93.
Contact your dealer or call Epson at 800-GO-EPSON
(800-463-7766). Request part number V13H010L58.
Follow these steps to replace the lamp:
1. Turn off the projector and unplug the power cord.
2. Let the projector cool for at least an hour (if it has been on). The
lamp is extremely hot immediately after use.
3. Loosen the lamp cover screw (you cannot remove it). Then slide
the lamp cover off.
Lamp
light
warning
Let the lamp cool fully
before replacing it.
In the unlikely event that
the lamp has broken, small
glass fragments may be
present and should be
removed carefully to avoid
injury. If the projector has
been installed on the ceiling,
you should stand to the side
of the lamp cover, not
underneath it.
If the lamp is used after the
replacement period has
passed, the possibility that
the lamp may break
increases. When a lamp
replacement message
appears, replace the lamp
with a new one as soon as
possible, even if it is still
working.

Other manuals for Epson PowerLite 1260

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite 1260 and is the answer not in the manual?

Epson PowerLite 1260 Specifications

Projection Specifications IconProjection Specifications
projection systemEpson 3LCD, 3-chip technology
native resolution1280 x 800 (WXGA)
white light output2600 lumens
color light output2600 lumens
contrast ratioUp to 2000:1
color reproduction16.77 million colors
Lamp and Lens IconLamp and Lens
lamp type200 W UHE
lamp life (ECO mode)Up to 5000 hours
lamp life (Normal mode)Up to 4000 hours
f-number1.58 – 1.72
focal length16.9 mm – 20.28 mm
zoom ratioOptical zoom 1.0 – 1.2
Power and Operating Conditions IconPower and Operating Conditions
power supply voltage100 – 240 V ±10%, 50/60 Hz
power consumption280 W
fan noise (Normal mode)37 dB
fan noise (ECO mode)29 dB
operating temperature41° to 95°F (5° to 35°C)
Packaging Specifications IconPackaging Specifications
packaging dimensions14.6" x 13.4" x 6.4" (W x D x H)
packaging weight9.3 lb
genuine Epson lamp dimensions6.3" x 5.6" x 5.6" (W x D x H)
genuine Epson lamp weight0.7 lb
replacement air filter dimensions4.8" x 3.5" x 1.9" (W x D x H)
replacement air filter weight0.1 lb
Weight and Dimensions IconWeight and Dimensions
dimensions including feet11.6" x 9.0" x 3.1"
dimensions excluding feet11.6" x 9.0" x 3.0"
weight5.1 lb/2.3 kg

Related product manuals