Epson PowerLite 1705c Quick Start Guide
(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf
TURN ON YOUR EQUIPMENT
1.
Connect the power cord to the back of the
projector and plug the other end into an
electrical outlet.
2.
Open the A/V Mute slide. Make sure the
slide is opened completely.
3.
To turn the projector on, press the
Power button on the projector or the
remote con
and the projector’s Power light flashes
green and then stays on.
CAUTION: Before unplugging the
projector…
Shut down the projector properly:
1. Press the Power bu
2.
When the orange light stops flashing
and the projector beeps, you can unplug
the projector.
Epson PowerLite 1705c Quick Start Guide
(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf
Connect the power cord to the back of the
projector and plug the other end into an
Open the A/V Mute slide. Make sure the
To turn the projector on, press the
Power button on the projector or the
s once,
and the projector’s Power light flashes
CAUTION: Before unplugging the
Shut down the projector properly:
When the orange light stops flashing
and the projector beeps, you can unplug
ADJUST THE IMAGE
1. To raise the image,
and lift the front.
lock the foot in position.
2.
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the
image.
3.
move the projector so that it is directly in
front of the screen, facing the screen
squarely.
4.
pres the or
(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf
)
e front adjustable foot
lock the foot in position.
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the
or
move the projector so that it is directly in
front of the screen, facing the screen
or
buttons on the
To Next Page
Need help?
General