Troubleshooting
19
Problems Concerning EasyMP Slide Converter
Convert to FSE is not displayed in the PowerPoint right click menu.
Cannot convert to a scenario.
Cannot play scenarios.
Check Remedy
Was PowerPoint installed after installing EasyMP Slide
Converter?
The menu may not be displayed, if PowerPoint is installed after installing EasyMP Slide Converter.
Reinstall EasyMP Slide Converter.
Check Remedy
Is PowerPoint running? Close PowerPoint before starting conversion. Also, do not start PowerPoint during conversion.
Was Slides or Custom Show set as the Slide View setting? You cannot convert when Slides or Custom Show is set as the Slide View setting. Select All as the Slide
View.
Check Remedy
Is the correct resolution selected? When the resolution of the projector that is projecting the scenario is XGA type, scenarios for which
WXGA (1280 x 800 dots) is set cannot be played back. Project after converting the PowerPoint file to
an XGA (1024 x 768 dots) scenario file.
To Next Page
Loading...
Need help?
General