Additionally, applications that use DirectX
®
functions may not display correctly.
Close any windows displayed over the EasyMP Slide Converter window before converting files.
Additional Updates
PowerLite 1830 only:
To output audio from the projector when using a device connected to the following ports, connect an audio
cable from the source’s audio port to the projector’s Audio2 port:
■ USB Type B port (for display)
■ USB (for a connected USB device)
■ LAN (for a network device)
PowerLite 1915/1925W only:
You can use the WPA2 wireless network security method with your projector.
You can register these types of certificates for the EAP-TLF security method:
■ Client certificate (.pfx); certificates without passwords (NULL) are not supported
■ CA certificate (.cer); binary encoded files (DER) are supported, but BASE64 encoded files are not
When using the Windows 7 or Windows Vista Network Projector function to display images over a network,
audio is not transferred. To transmit audio, connect an audio cable between the audio out port on your
computer and the projector’s Audio2 port.
All projector models:
The
Progressive setting on the Signal menu does not include an On option, as described in your projector
User’s Guide.
USB Display requirement updates:
■ Your computer’s display resolution must be at least 640 × 480 and no higher than 1680 × 1200.
■ Your operating system must be 32 bit.
To Next Page
Loading...
