60
5. Replace the wireless LAN module stopper and secure it using the screw you removed.
6. Close the air filter cover.
7. Plug in and turn on the projector.
Parent topic: Wireless Network Projection
Installing the Wireless LAN Module into the USB-A port
To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module into the
projector's USB-A port (PowerLite 2040/2140W). Do not install any other type of wireless module.
Note: The wireless LAN module and module cover are not included with your projector.
Caution: Never remove the module while its indicator light is blue or flashing, or while you are projecting
wirelessly. You may damage the module or lose data.
To Next Page
Loading...
