4 • Using ELP Link III
114
Follow these steps to assign functions to the keyboard:
1. Click Keyboard Customize on the ELP Link III main dialog
box. A dialog box similar to the following appears. (The
functions listed are those currently assigned to the Effects
buttons on the remote control.)
2. Position the cursor in the field beside each function and press a
key or key combination. To use the combination of the Ctrl key
and a second key, hold down the Ctrl key while you press the
other key.
Note:
To clear an assignment, position the cursor in the field
you want to clear and click Clear.
3. Click OK to return to the ELP Link III main dialog box.
4. If you want to make key assignments for additional functions,
recall a new set of Effects button assignments in the main dialog
box and repeat steps 1 through 3.
To Next Page
Loading...
