Epson PowerLite 7550C - Assigning the Logo to the Av;Mute Button

3 • Adjusting Projector Settings
80
Assigning the Logo to the AV/Mute Button
Follow these steps to assign the logo to the AV/Mute button:
1. Press the Menu button to open the Main menu.
2. Select the Setting menu and press the Enter button.
3. Select the Blank (AV/Mute) option, then highlight Logo.
4. Press the Menu button to return to the Main menu.
Now you can press the AV/Mute button on the control panel or the
remote control to display your logo. Press it again when you want to
stop displaying the logo.