Creating and Assigning a User Logo
79
6. The message “Do you use this image?” appears on the screen.
Select Yes and press the Enter button. If you want to change the
position, select No.
7. Next, the Zoom rate setting window appears on the screen.
Select a rate using the arrow buttons or pointer, then press the
Enter button.
8. The message “Do you save the user logo?” appears on the
screen. Select Yes and press the Enter button. If you don’t want
to save the logo, select No.
Note:
Saving the logo may take a moment. Don’t use the
projector or other sources (computer, video, speaker, etc.)
while the logo is being saved.
9. When the message “Saving the user logo is completed.” appears
on the screen, press the Menu or Enter button to display the
Main menu.
To Next Page
Loading...
