1 • Setting Up the Projector
24
Connecting the projector’s video cable
Note:
Computer configurations vary. See your computer manual for
the location of the ports needed to connect your projector.
1. Turn off the projector and computer, if they’re on.
2. Connect either end of the projector’s video cable to the
Computer In port.
3. Disconnect the computer’s monitor cable from the video port on
the back of the computer.
4. Connect the other end of the projector’s video cable to the
computer’s video port.
projector video cable
Computer Out port
Computer In
port
computer’s monitor cable
(optional)
projector video cable
To Next Page
Loading...
