1 • Setting Up the Projector
30
Connecting the projector’s mouse cable
Connect the projector’s PS/2 mouse cable if you want to use the
projector’s remote control as a mouse pointer for your computer.
Note:
If you’ll be using the optional ELP Link III software, you need
to connect the mouse cable included in the ELP Link III kit instead.
See Chapter 4 for instructions.
1. Connect the small end of the PS/2 mouse cable included with
the projector to the laptop’s mouse port.
2. Connect the other end of the PS/2 mouse cable to the projector’s
Mouse/Com port.
Mouse/Com
port
PS/2 mouse cable
To Next Page
Loading...
