1 • Setting Up the Projector
34
6. Disconnect the monitor cable from the video port on the back of
your Macintosh.
7. Connect the projector’s video cable (with the desktop adapter
attached) to the video port on the back of your Macintosh.
8. If you want to view images on your computer’s monitor, locate
the Macintosh monitor adapter that came with your projector.
9. Attach the large end of the adapter to your computer’s monitor
cable, and attach the small end of the Macintosh monitor
adapter to the projector’s Computer Out port.
10. Tighten the screws on all the connectors.
To Next Page