1 • Setting Up the Projector
42
Connecting the projector’s mouse cable
Connect the Macintosh mouse cable that came with your projector if
you want to use the projector’s remote control as a mouse pointer
for your Macintosh.
Note:
If you’ll be using the optional ELP Link III software, you need
to connect the Macintosh mouse cable included in the ELP Link III
kit instead. See Chapter 4 for instructions.
1. Connect the small end of the projector’s Mac mouse cable to the
mouse port on your PowerBook.
2. Connect the cable’s other end to the projector’s Mouse/Com
port.
Mouse/Com port
Mac mouse cable
To Next Page
Loading...
