Epson PowerLite 78 - Connecting an S-Video Source

30 Setting Up the Projector
Connecting an S-Video Source
1. Connect the S-Video cable to the S-Video connector on your
player and the
S-Video port on the projector.
2. If you want to play sound through the projector, see page 34 for
instructions on connecting an audio cable.
When you’ve finished making connections, see page 37 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If the S-Video cable was not
p
rovided with your video
device, you can purchase one
f
rom Epson; see page 12.
S-Video port
PowerLite S6 Series/PowerLite 78
PowerLite W6 Series