Page 3 of 5
PSB.2007.09.001
For Simple Mode
There is a difference in the following buttons between
Simple Mode and Advanced Mode.
Button Function
Computer Switches the input sources among the Computer
input port, the Computer1 input port, the
Computer2 input port, and EasyMP.
Every time you click the button, the source
changes in the following order.
Computer input port or Computer1 input port->
Computer2 input port→ EasyMP-> Computer
input port or Computer1 input port…
Video Switches the input sources between the Video
input port and the S-Video input port.
Every time you click the button, the source
changes in the following order.
Video input port-> S-Video input port-> Video
input port
Item Function
Register at startup Check this for EPSON Projector Control to start
up automatically when the computer starts.
Projector IP Address Enter the IP address for the projector to be
connected. You need to do this only when you
make a connection for the first time or when
you want to change to another projector to be
connected.
Monitor Password Enter the Monitor Password that is set on the
projector. You do not need to do this when the
Monitor Password is not set on the projector.
OK Click this to reflect the setting changes that you
made. The setting screen is saved and closed.
Or
Click × on the title bar not to reflect the setting
changes.
Cancel Click this to abort the setting changes.
To Next Page
Loading...
Need help?
General