Note: To start a meeting using the moderator function, one user must connect to the projector as the
moderator and the other users must connect to the projector as participants.
Parent topic: Connection Methods
Related tasks
Changing the Moderator
Connecting to the Projector from the Software over a Network System
Connecting to the Projector from the Software over a Network System
When your projector is set up as indicated below, you can connect the projector and a computer over a
network by using EasyMP Multi PC Projection.
• The wireless LAN unit is installed in the projector (wireless networks only).
• A LAN cable is connected to the projector (wired networks only).
• The projector's connection method is set to Advanced.
Note: Make sure you also connected a computer to the network.
20
To Next Page
Loading...
