Error Messages Remedy
Network adapter information could not be Check the following items.
obtained.
• A network adapter is installed on the computer.
• The driver for the network adapter being used is
installed on the computer.
• The network adapter is enabled.
After checking, restart the computer and then
restart EasyMP Multi PC Projection.
If you still cannot connect, check the network
settings on the computer and the network settings
on the projector.
Cannot start from the shortcut while projecting. Stop projecting and then start projection from the
shortcut. You cannot start projection from the
shortcut when you are already projecting using
EasyMP Multi PC Projection.
Cannot start from the shortcut while the Option The Set options screen is displayed. Close the
screen is displayed. Close the Option screen, and Set options screen.
then try opening the shortcut again.
The slide show will not begin until PowerPoint is Close PowerPoint, and then start the slide show
restarted. again.
Cannot be used with the current OS version. Reinstall EasyMP Multi PC Projection.
Reinstall EasyMP Multi PC Projection.
Parent topic: Error Messages List
Related tasks
Uninstalling EasyMP Multi PC Projection (Windows XP/Windows Vista/Windows 7)
Uninstalling EasyMP Multi PC Projection (Windows 8)
Uninstalling EasyMP Multi PC Projection (Mac OS X)
Installing EasyMP Multi PC Projection (Windows)
Installing EasyMP Multi PC Projection (Mac OS X)
56
To Next Page
Loading...
