Event ID Cause Remedy
0898 Failed to acquire DHCP. Check the DHCP server to see if it is
operating correctly and check the LAN cable
to see if it is connected correctly. If you are
not using DHCP, set DHCP to Off.
0899 Other communication errors If restarting the projector or the network
software does not solve the problem,
contact Epson as described in your projector
User's Guide.
089A The EAP authentication type is not the Check that the wireless LAN security
same. settings are correct. Also, check if the
certificate is installed correctly.
089B EAP server authentication failed.
089C EAP client authentication failed.
089D Key exchange failed.
0B01 The built-in storage could not be detected Perform Delete All Internal Data. When the
correctly. internal storage is deleted correctly, plugin
the power cord for the projector and turn it
on. If it is not deleted correctly, contact
Epson as described in your projector User's
Guide.
Go to Extended > Whiteboard Settings >
Internal Storage.
0BFF An error has occurred in the Whiteboard Restart the projector.
function.
Parent topic: Solving Problems
61