Setting Options Description
Lens Cover Timer On Automatically turns off the
projector after 30 minutes if the
Off
lens cover is closed
A/V Mute Timer On Automatically turns off the
projector after 30 minutes if A/V
Off
Mute is enabled
Standby Mode Communication On
Enable this setting to allow the
Communication Off following operations to occur
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)
• Output audio from a
microphone (A/V Output must
be set to Always On)
ECO Display On Displays a leaf icon in the bottom
left corner of the projected screen
Off
to indicate the power-saving
status when the lamp brightness
changes
Parent topic: Adjusting the Menu Settings
Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
116
To Next Page
Loading...
