EasyManuals Logo

Epson PowerLite 955W User Manual

Epson PowerLite 955W
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #142 background imageLoading...
Page #142 background image
If you connected an extension power cable, try projecting without it to see if it caused interference in
the signal.
If you are using the USB Display function, turn off the Transfer layered window setting in the Epson
USB Display Settings program on your computer.
Parent topic: Solving Image or Sound Problems
Related references
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Supported Video Display Formats
Solutions When the Image is Fuzzy or Blurry
If the projected image is fuzzy or blurry, try the following solutions:
Adjust the image focus.
Clean the projector lens.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the
projector warm up to room temperature before using it.
Position the projector close enough to the screen.
Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
Turn on automatic keystone adjustment in the projector's menus.
Adjust the Sharpness setting to improve image quality.
If you are projecting from a computer, press the Auto button on the remote control to automatically
adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned
image on the screen and manually adjust the Tracking and Sync settings.
If you are projecting from a computer, use a lower resolution.
Parent topic: Solving Image or Sound Problems
Related references
Projection Distance
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Feature Settings - Settings Menu
142

Table of Contents

Other manuals for Epson PowerLite 955W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite 955W and is the answer not in the manual?

Epson PowerLite 955W Specifications

General IconGeneral
Number of colors1.073 billion colors
Native aspect ratio16:10
Projection distance0.84 - 8.4 m
Projection technology3LCD
Contrast ratio (typical)10000:1
Screen size compatibility29 - 280 \
Projector native resolutionWXGA (1280x800)
Keystone correction, horizontal-30 - 30 °
FocusManual
Throw ratio1.38 - 2.24:1
Zoom capabilityYes
Focal length range18.2 - 29.2 mm
Aperture range (F-F)1.51 - 1.99
Lamp typeUHE
Lamp power200 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source5000 h
Service life of light source (economic mode)6000 h
3D-
Full HDNo
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions1280 x 960, 1366 x 768, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Composite video in0
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantity2
VGA (D-Sub) ports quantity3
Noise level37 dB
Noise level (economic mode)29 dB
RMS rated power16 W
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
Voltage tolerance10 %
AC input frequency50 - 60 Hz
Power consumption (standby)3 W
Power consumption (typical)299 W
Power consumption (PowerSave)221 W
Operating temperature (T-T)5 - 35 °C
Cables includedAC, VGA
Remote control typeIR
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth271 mm
Width294 mm
Height89 mm
Weight2900 g

Related product manuals