Two Connection Modes
9
Two Connection Modes
There are two methods of connecting a computer and the projector via a
network by using EasyMP Network Projection.
q
• Depending on the projector model, either wired LAN connection or wireless
LAN connection may not be available.
• To use the wireless LAN connection, you need the Wireless LAN unit for
the projector.
If the Wireless LAN unit is not supplied with your projector, please
purchase the optional accessory. See your projector User’s Guide for details
on optional accessories.
Quick Connection Mode
Quick Connection Mode is only available when you install the Wireless
LAN unit in the projector.
In Quick Connection Mode, you can connect the projector and the
computer directly using wireless communication. You can easily project
images on the computer without making complex network settings
because a wireless LAN access point is not required.
Advanced Connection Mode
Advanced Connection Mode is an infrastructure connection, and
connects to an existing network system.
In Advanced Connection Mode, you can connect the projector and the
computer via a LAN access point.
When connecting to a network via Wired LAN, connect the projector to
the network hub with a commercially available LAN cable.
To Next Page
Loading...
Need help?
General