Troubleshooting
47
Enter the keyword displayed on the projector screen. Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword.
Cannot start this application while USB Display is running. Close USB Display and then start EasyMP Network Projection.
To output audio from the projector, restart applications
such as PowerPoint or Windows Media Player.
After restarting PowerPoint or Windows Media Player, audio is output from the projector.
You need to restart your computer to enable Audio
Output. Select "Yes" to restart now or select "No" to restart
later.
To transfer audio to the projector and play back, select Yes and restart the computer.
Cannot start this application while Quick Wireless
Connection is running.
Close Quick Wireless Connection and then start EasyMP Network Projection.
The wireless LAN is off.Turn on the wireless LAN, and then
try searching again.
Turn on your computer's wireless LAN, and then try searching for the projector again.
Error Messages Remedy
To Next Page
Loading...
Need help?
General