Power light Lamp Temperature Filter light Status and solution
light light
On Off Off Flashing It is time to clean the air filter.
green
On Off Off Flashing Low air flow through the projector.
orange
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• If low air flow continues, replace the air
filter.
• If the problem persists, unplug the projector
and contact Epson for help.
On Off Off Orange No air filter. Check to see if the air filter is
securely installed.
Red Off Off Red Low air flow through the air filter.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• If low air flow continues, replace the air
filter.
• If the problem persists, unplug the projector
and contact Epson for help.
On Flashing Off Off Replace the lamp right away to avoid
orange damage. Do not continue using the projector.
Red Off Flashing red Off A fan or sensor has a problem. Turn the
projector off, unplug it, and contact Epson for
help.
Red or flashing Flashing Flashing red Off Internal projector error or air exhaust vent
red red error. Turn the projector off, unplug it, and
contact Epson for help.
Red Off Off Flashing The air flow sensor has a problem. Turn the
red projector off, unplug it, and contact Epson for
help.
144
To Next Page
Loading...
Need help?
General