• To drag-and-drop, hold the Enter button as you move the cursor with the arrow buttons, then
release Enter at the destination.
Parent topic: Remote Control Operation
Using the Remote Control as a Presentation Pointer
You can use the projector's remote control as a pointer to help you call out important information during
a presentation. The default pointer shape is an arrow, but you can select an alternative shape using the
Settings menu.
1. Press the Pointer button on the remote control.
2. Use the arrow buttons on the remote control to move the pointer on the screen.
3. Press Esc to clear the pointer from the screen.
Parent topic: Remote Control Operation
77
To Next Page
Loading...
Need help?
General