Epson PowerLite L400U User Manual

37
2. Connect the other end to one of the projector's HDMI ports.
Note: The projector converts the digital audio signal sent from your computer into a mono analog signal
for the internal speaker or a stereo analog signal if you are connecting to external speakers. (Make sure
the HDMI audio playback device on your computer's audio settings is set to EPSON PJ.)
Parent topic: Connecting to Computer Sources
Related references
Additional Components
Projector Setup Settings - Extended Menu
Connecting to a Computer for Sound
If your computer presentation includes sound and you did not connect it to the projector's HDMI port, you
can still play sound through the projector's speaker system. Just connect an optional 3.5 mm stereo
mini-jack audio cable as described here.
1. Connect the audio cable to your laptop's headphone or audio-out jack, or your desktop's speaker or
audio-out port.

Epson PowerLite L400U Specifications

General

Brightness	4000 lumens
Contrast Ratio	2, 500, 000:1
Light Source	Laser
Projection Technology	3LCD
Video Modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Aspect Ratio	16:10
Resolution	1920 x 1200
Connectivity	HDMI, VGA, USB
Lamp Life	20, 000 hours
Keystone Correction	Vertical: ±30 degrees, Horizontal: ±30 degrees
Speakers	16W
Projection Size	30" - 300"