47
Parent topic: Setting Up the Projector
Attaching the Zoom Ring Locks
You can attach the zoom ring locks supplied with your projector to prevent the zoom ring from moving
after adjusting the zoom and focus (PowerLite L500W).
1. Pinch the ends of the zoom ring lock and slide the middle tab into one of the zoom ring lock holders.
Then release the ends of the lock.
2. Repeat with the other zoom ring lock.
To remove the zoom ring locks, pinch the ends and pull them off of the holders. Adjust the zoom or focus
as necessary, and reinstall the zoom ring locks when you finish.
To Next Page
Loading...
Need help?
General