Epson PowerLite Pro G5650WNL - Managing a Profile

Connecting to a Projector on a Different Subnet
39
Procedure
A Click "Profile" on the EasyMP Network Projection projector
selection screen.
If no Profile is registered, you cannot select Profile.
B From the menu that is displayed, select the projector you
want to connect to.
The search results are displayed on the EasyMP Network Projec-
tion projector selection screen.
When the target projector has been identified, select that projector,
and then click Connect to establish a connection.
Managing a Profile
You can change the name and the hierarchical structure of the Profile.
Procedure
A Click "Set options" on the main screen of EasyMP Network
Projection.
The Set options screen is displayed.
B Click "Edit profile."
The Edit profile screen is displayed.