1111111111
1
Connect the splitter to the computer with a VGA cable.
2
Connect the commander and the receiver to the splitter
with VGA cables.
3
Connect the commander or receiver to the computer with
an audio cable.
Audio is output from the connected projector.
First, check that the commander and the
receiver are properly connected with the
USB cable.
Next, obtain the following items (not included):
3 VGA cables
Audio cable (when outputting audio)
VGA splitter
•
•
•
•
•
Commander
Commander
Receiver
Receiver
Computer cable
(not included)
Computer cable
(not included)
Computer cable
(not included)
Audio cable
(not included)
Audio-L/R
Audio-L/R
Computer1
Computer1
Connecting to a
computer
Connecting with
computer cables
VGA splitter
(not included)
To Next Page
Loading...
