1010101010
Connecting the
commander and the
receiver
You need to connect
a USB cable to link the
commander and the
receiver.
Connecting
Equipment
Commander
Commander
Receiver
Receiver
USB cable
Power cable
Power cable
Power inlet
Power inlet
1
Plug in the power cables for the commander and the
receiver.
2
Connect the commander's USB-A port to the receiver's
USB-B port with the supplied USB cable.
The projectors will not be linked if the wrong
USB ports are connected with the USB cable.
USB-A
USB-B
First, connect the power cables and the USB cable.
To Next Page
Loading...
