9
Superimpose two images.
Press the [Screen Fit] button. The images from the
commander and the receiver are
automatically superimposed.
If you need to ne tune
the superimposed
images
If you need to make ne
adjustments, select Yes, and then
press the [ ] button.
The manual adjustment screen is
displayed.
If you need to make ne
adjustments, see the next
section.
If you have nished making
adjustments, select No, and then
press the [ ] button.
2
Correct the four corners individually.
The white pattern is for adjusting
the commander, and the green
pattern is for adjusting the
receiver.
1
Adjust both projected
images manually.
Use the [ ] [ ] [ ] [ ]
buttons to correct the position of
the corners.
Correct each corner as necessary.
Press the [Esc] button to nish
making settings.
Use the [ ] [ ] [ ] [ ]
buttons to select the corner you
want to correct, and then press
the [ ] button.
When adjusting
each corner individually,
adjust so that the white
and green patterns
overlap to create one
pattern.
1717171717
To Next Page
Loading...
