Connecting to Video Sources
Follow the instructions in these sections to connect video devices to the projector.
Connecting to an HDMI Video Source
Connecting to a Component-to-VGA Video Source
Connecting to an S-Video Video Source
Connecting to a Composite Video Source
Connecting to a Video Source for Sound
Parent topic: Projector Connections
Connecting to an HDMI Video Source
If your video source has an HDMI port, you can connect it to the projector using optional HDMI cables
and a splitter that supports HDMI signals. The HDMI connection provides the best image quality.
Note: If your video source has two HDMI ports, you may not need a splitter.
1. Connect an HDMI cable between your video source's HDMI output port and the splitter.
2. Connect an HDMI cable between each projector's HDMI port and the splitter.
Note: The projector will convert the digital audio signal sent from your video source into a mono analog
signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.
29
To Next Page
Loading...
