When the projector's Stack Mode setting is set to Off, it functions like a PowerLite W16 projector, but
without 3D capabilities.
See the PowerLite W16 User's Guide for instructions when using the projector with stack mode
deactivated.
Restacking the Projectors
Parent topic: Using the Projectors Individually
Restacking the Projectors
You can restack the projectors after separating them and set them up for use together again.
Note: This procedure requires you to turn each projector on and off individually. To avoid turning on both
projectors accidentally, do not use the remote control during this process.
74
To Next Page
Loading...
