109
Setting Options Description
Projection Front
Front/Ceiling
Rear
Rear/Ceiling
Selects the way the projector faces
the screen so the image is oriented
correctly
Geometry Correction H/V-Keystone
Quick Corner
Point Correction
Adjusts image shape to rectangular
(horizontally and vertically)
H/V Keystone: lets you manually
correct horizontal and vertical sides
Quick Corner: select to correct
image shape and alignment using
an on-screen display
Point Correction: select to divide
the projected image into a grid and
correct distortion by moving a
selected point
Blanking Top
Bottom
Left
Right
Hides the edges of the screen if
there is noise from the input signal
High Altitude Mode On
Off
Regulates the projector's operating
temperature at altitudes above 4921
feet (1500 m)
Note: The cooling fans inside the
projector run faster and may sound
louder when this setting is enabled;
this is normal.
Reset Installation Settings — Resets all settings on the Installation
menu to their default values
Parent topic: Adjusting the Menu Settings
To Next Page
Loading...
