Epson Pro Cinema LS12000 - Correcting Image Shape with Point Correction

54
7. Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the area
selection screen.
8. When you are finished, press Esc.
The Geometry Correction setting is now set to Quick Corner in the projector's Installation menu.
Parent topic: Image Shape
Correcting Image Shape with Point Correction
You can use the projector's Point Correction feature to fine-tune the image shape using points on a grid.
This is useful for adjusting overlapping areas in multiple projected images that do not line up correctly.
1. Turn on the projector and display an image.
2. Press the Menu button.