Epson Pro Cinema LS12000

To Next Page

To Previous Page

3. Select the Installation menu and press Enter.

4. Select the Geometry Correction setting and press Enter.

5. Select the Quick Corner setting and press Enter.

Main Page

Table of Contents3
Pro Cinema LS12000 User's Guide9
Introduction to Your Projector10
Projector Features10
Product Box Contents11
Additional Components12
Optional Equipment and Replacement Parts12
Warranty and Registration Information (U.S. and Canada)13
Warranty and Registration Information (Latin America)13
Notations Used in the Documentation13
Where to Go for Additional Information14
Projector Part Locations14
Projector Parts - Front/Top15
Projector Parts - Rear16
Projector Parts - Base18
Projector Parts - Remote Control19
Setting up the Projector21
Projector Placement21
Projector Setup and Installation Options21
Projection Distance23
Projector Connections27
Connecting to an HDMI Video Source28
Connecting to a Computer for HDMI Video28
Connecting to a Streaming Media Player29
Connecting External Output Devices30
Connecting an A/V System or External Speakers Using HDMI ARC30
Connecting to a Trigger out Port31
Attaching and Removing the Cable Cover32
Installing Batteries in the Remote Control34
Monitoring and Controlling the Projector37
Connecting to a Wired Network37
Selecting Wired Network Settings37
Projector Control Settings39
Using Basic Projector Features41
Turning on the Projector41
Turning off the Projector43
Selecting the Language for the Projector Menus44
Adjusting the Image Height45
Adjusting the Image Position Using Lens Shift46
Image Shape48
Correcting Image Shape with H/V-Keystone48
Correcting Image Shape with Quick Corner51
Correcting Image Shape with Point Correction54
Resizing the Image with the Zoom Feature56
Focusing the Image with the Lens Button57
Remote Control Operation58
Selecting an Image Source58
Projection Modes59
Changing the Projection Mode Using the Menus60
Image Aspect Ratio61
Changing the Image Aspect Ratio61
Available Image Aspect Ratios62
Color Mode62
Changing the Color Mode63
Available Color Modes63
Adjusting Image Sharpness64
Adjusting the Projector's Brightness Level65
Turning on Dynamic Contrast66
Adjusting the Color Temperature66
Adjusting the RGB Offset and Gain68
Adjusting Gamma69
Adjusting the Hue, Saturation, and Brightness72
Adjusting Projector Features74
Operating Connected Devices Using the HDMI Link Features74
Shutting off the Picture Temporarily76
Projector Security Features76
Locking the Projector's Lens Settings and Buttons77
Unlocking the Projector's Buttons78
Installing a Security Cable78
Using Advanced Image Adjustment Features79
Using Frame Interpolation79
Creating Image Presets81
Adjusting the Color Convergence (Panel Alignment)83
Adjusting the Color Tone (Color Uniformity)87
Saving Settings to Memory and Using Saved Settings90
Copying Menu Settings between Projectors92
Saving Settings to a USB Flash Drive92
Transferring Settings from a USB Flash Drive93
Saving Settings to a Computer94
Transferring Settings from a Computer95
Adjusting the Menu Settings97
Using the Projector's Menus97
Image Quality Settings - Image Menu99
Input Signal Settings - Signal I/O Menu104
Installation Settings - Installation Menu108
Display Settings - Display Menu110
Feature Settings - Operation Menu112
Administration Settings - Management Menu114
Network Settings - Network Menu117
Image Quality Memory Settings - Memory Menu119
Initial Settings and Reset Options - Initial/All Settings Menu120
Maintaining and Transporting the Projector122
Projector Maintenance122
Cleaning the Lens122
Cleaning the Projector Case123
Air Filter and Vent Maintenance123
Cleaning the Air Filter124
Replacing the Air Filter128
Replacing the Remote Control Batteries130
Updating the Firmware132
Updating Projector Firmware Using a USB Storage Device132
Updating Projector Firmware Using a Computer and USB Cable133
Transporting the Projector134
Solving Problems135
Projection Problem Tips135
Projector Light Status136
Solving Image or Sound Problems138
Solutions When no Image Appears139
Solutions When "No Signal" Message Appears140
Displaying from a PC Laptop140
Displaying from a Mac Laptop141
Solutions When Only a Partial Image Appears141
Solutions When the Image Is Not Rectangular142
Solutions When the Image Contains Noise or Static142
Solutions When the Image Is Fuzzy or Blurry143
Solutions When the Image Brightness or Colors Are Incorrect144
Solutions to Image and Sound Syncing Problems145
Solutions to Sound Problems145
Solving Projector or Remote Control Operation Problems145
Solutions to Projector Power or Shut-Off Problems146
Solutions to Remote Control Problems146
Solutions to HDMI Link Problems147
Where to Get Help (U.S. and Canada)148
Where to Get Help (Latin America)149
Technical Specifications151
General Projector Specifications151
Projector Light Source Specifications153
Remote Control Specifications153
Projector Dimension Specifications153
Projector Electrical Specifications156
Projector Environmental Specifications156
Projector Safety and Approvals Specifications157
Supported Video Display Formats157
Notices158
Recycling (U.S. and Canada)158
Important Safety Information158
Laser Safety Information158
Important Safety Instructions161
Restriction of Use164
List of Safety Symbols (Corresponding to IEC60950-1 A2)164
FCC Compliance Statement169
Binding Arbitration and Class Waiver170
Trademarks173
Copyright Notice173
A Note Concerning Responsible Use of Copyrighted Materials174
Copyright Attribution174

Epson Pro Cinema LS12000 - Page 52

Table of Contents

Other manuals for Epson Pro Cinema LS12000

Related product manuals