32
2. Connect the cable to your projector's USB-B port.
EX3260/EX5260/Pro EX7260/VS250/VS350/VS355
Pro EX9210/Pro EX9220
3. Connect the other end to any available USB port on your computer.
4. Do one of the following:
• Windows 10/Windows 8.x: Click EPSON_PJ_UD when it appears on the desktop, then select
Run EMP_UDSE.EXE in the dialog box that appears to install the Epson USB Display software.
• Windows 7/Windows Vista: Select Run EMP_UDSE.EXE in the dialog box that appears to
install the Epson USB Display software.
• Mac: The USB Display setup folder appears on your screen. Select USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software.
Follow any on-screen instructions. You need to install this software only the first time you connect
the projector to the computer.
To Next Page
Loading...
