54
1. Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection
(Windows/Mac) software.
Note: See the online Epson iProjection Operation Guide (Windows/Mac) for instructions.
2. Turn on the projector.
3. Remove the wireless LAN module from the USB-A port
(EX3260/EX5260/Pro EX9210/VS250/VS350/VS355).
4. Insert the USB key into the projector's USB-A port.
EX3260/EX5260/Pro EX7260/VS250/VS350/VS355
Pro EX9210/Pro EX9220
You see a projected message that the network information update is complete.
5. Remove the USB key.
To Next Page
Loading...
