149
The selected point turns orange.
12. Use the arrow buttons to move the point to the edge of the adjustment area.
13. To move another point, press the Esc button and repeat the previous two steps.
14. When you are finished, press the Esc button twice.
15. When you see the confirmation message, select Yes to return to the Black Level menu screen.
16. When you are finished, press the Menu button.
Note: Changing any of the Edge Blending settings resets the Black Level setting to its default
value.
Parent topic: Using Multiple Projectors
Matching the Image Colors
You can match the display quality of multiple projectors that will project next to each other.
To Next Page
Loading...
