❏ Do not rub or scratch the printed surface. If they are
rubbed or scratched, the ink may peel off.
❏ Do not touch the printed surface; Failure to observe
this precaution may cause ink to rub off.
❏ Make sure the print outs are completely dry before
folding of stacking; otherwise, the color may change
where they touch (leaves a mark). These marks will
disappear if they are separated immediately and
dried; however, they will remain if not separated.
❏ If you put the print outs in an album before they are
completely dry, they may be blurred.
❏ Do not use a dryer to dry the print outs.
❏ Avoid direct sunlight.
❏ Prevent color distortion while displaying or storing
the print outs by following the instructions in the
paper's documentation.
Note:
Typically, print outs and photos fade over time (color
distortion) due to the effects of light and various
constituents in the air. But, if care is taken in how these
items are stored, you can help reduce discoloration.
The colors of photos, posters, and other printed materials
appear different under different lighting conditions (light
sources
*
). The colors of print outs from this printer may
also appear different under different light sources.
* Light sources include sunlight, fluorescent light,
incandescent light, and other types.
SC-B6000 Series User’s Guide
Introduction
17
To Next Page
Loading...
Need help?
General
