F
Raise the adapter lock lever to release the lock on
each of the two roll paper adapters.
Press the adapters in until they are fully inserted
in the roll, with no gaps.
G
Lower the adapter lock levers to lock the adapters
in place.
H
Slide the roll paper right until it contacts the
adapter guides.
Following the adapter guide, slide the roll slowly
to the opposite side.
I
Press the ( button on the control panel.
Confirm that Roll Paper is highlighted in the
display and press the Z button.
J
Insert the roll paper in the paper slot and pull it
through.
Make sure that the paper is free of slack and that
the end is not folded.
Note:
Do not touch the paper where it will be printed.
After loading the roll paper, rotate the roll paper
adapters as shown to feed the paper through.
SC-B6000 Series User’s Guide
Basic Operations
22
To Next Page
Loading...
Need help?
General
