E
To avoid soiling your surroundings with ink,
wrap the used wiper unit in the packaging
supplied with the new wiper unit.
F
Insert the new wiper unit.
G
Lift up the tab on the flushing pad, and remove
it.
c
Important:
Do this carefully as ink could spray out if it is
raised with too much force.
Hold it at an angle and wait until the waste ink
stops dripping from the Flushing Pad. Remove
and place it on the metal tray.
SC-F3000 Series User's Guide
Maintenance
95
To Next Page
Loading...
Need help?
General