Printing Procedure
A
Load the paper you want to print on.
U “Getting Ready to Print” on page 4
B
After creating data in the application, click the
File menu, and then click Print.
C
Select the printer in Printer, and then click Printer
Properties.
The printer driver screen is displayed.
D
Check the following displayed content.
1. Document size/Output size
Content set in the application is displayed automatically in
the Document size.
To reduce or enlarge, select the Output size from the pull-
down menu below the Document size.
2. Roll Paper Width/Media Type
Settings made on the printer's control panel are displayed
automatically.
If you load or change paper after opening the Printer Settings
screen, click the Acquire Info button to update the settings.
3. Print Preview
Make sure this is selected.
This section explains basic printing methods using the
Windows printer driver.
Basic Printing
(Windows)
6
To Next Page
Loading...
