How to fix Epson printer that does not turn on?
If your Epson printer does not turn on, ensure the power cable is securely plugged into the printer. Also, check if your outlet works by connecting another electric product's power cable to it.
What to do if I cannot print under the network environment on Epson SC-S80650R?
If you can't print under the network environment, connect the Epson printer directly to the computer using a USB cable, and then try to print. If you can print via USB, there are some problems on the network environment.
What to do if my Epson printer sounds like it is printing, but nothing prints?
If your Epson printer sounds like it's printing but nothing comes out, first ensure the interface cable is securely plugged into both the computer and the printer. Also, verify that the cable specifications match those required by both devices. Try printing a test pattern. Plug the USB cable directly into your computer's USB port, and make sure the USB hub is correctly recognized by the computer.
Why is the print quality of my Epson printer poor?
If the print quality from your Epson printer is poor, uneven, too light or dark, grainy, or the tone differs, try replacing the old ink cartridge with a new one. You can also try printing a test pattern. If the print results are blurred or smudged or the ink clots, raise the temperature. Finally, confirm that the media settings in the software RIP or on the printer match the media you are using.
How to fix Epson SC-S80650R when test pattern does not print correctly?
If the test pattern on your Epson printer does not print correctly, select Media Adjust - Head Alignment in the media settings to adjust a print head misalignment that occurs during printing. You can also print a test pattern again after performing head cleaning. Select Media Adjust - Feed Adjustment in the media settings to make adjustment based on the target media. Also, perform steps to take when the printer has not been used for a long time.
How to fix Epson SC-S80650R with misaligned print head?
If the print head on your Epson printer is misaligned, select Media Adjust - Head Alignment in the media settings to adjust a print head misalignment that occurs during printing.
What to do if my Epson SC-S80650R Printer is not communicating with the computer?
If your Epson printer isn't communicating with your computer, consider the following: * Consult your network administrator for the correct network settings. * Connect the printer directly to the computer using a USB cable and attempt to print. If printing works via USB, the issue likely lies within the network environment. In that case, consult your system administrator or refer to the network system manual.
Why I cannot print under the network environment with my Epson SC-S80650R Printer?
If you're unable to print within a network environment, here are some steps to consider: * Consult your network administrator to verify the network settings. * Try connecting the printer directly to the computer using a USB cable and attempt to print. If printing is successful via USB, it indicates a problem within the network environment. Consult your system administrator or refer to the manual for your network system.
General| Type | Large Format Printer |
|---|---|
| Maximum Print Width | 64 inches |
| Print Resolution | Up to 1440 x 1440 dpi |
| Operating Systems | Windows, macOS |
| Print Technology | Inkjet |
| Ink Colors | Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta, White |
| Media Handling | Roll media |
| Connectivity | USB, Ethernet |
| Media Thickness | Up to 1.5 mm |
To Next Page
