Item Parameter Explanation
Side Margin(Right)
3 to 25 mm (5
*
)
Choose the width of the right margin when media is loaded in the printer.
See the following for more information.
U “Printable area” on page 57
Side Margin(Left)
3 to 25 mm (5
*
)
Choose the width of the left margin when media is loaded in the printer.
See the following for more information.
U “Printable area” on page 57
Print Start Position
0 to 800 mm (0
*
)
Adjust this parameter if you want to print from the near center of the
media or if you want to shift the printed area left from the Side
Margin(Right) setting. The area between the right edge of the media and
Print Start Position is left blank. If a value is selected for Side
Margin(Right), an additional area corresponding to the width selected
for Side Margin(Right) will be left blank. See the following for more
information.
U “Printable area” on page 57
Media Check
Media Size Check ON*
Choose whether the printer automatically detects (ON), or does not
automatically detect (OFF), the edges of the media. Try OFF if the printer
displays a Media Size Error when the media is correctly loaded. Note,
however, that the printer may print beyond the edges of the media when
OFF is selected. Ink used outside the edges of the media will stain the
inside of the printer. We generally recommend to operate with this setting
set to ON.
OFF
Media End Check ON*
Choose whether the printer automatically detects (ON) or does not
automatically detect (OFF), the end of the media. Try OFF if the printer
displays Media Out when the media is correctly loaded. We generally
recommend to operate with this setting set to ON.
OFF
Media Skew Check ON* When skewed media is detected, the printer will either stop printing and
display an error (ON) or continue printing (OFF). ON is recommended in
most circumstances, as skewed media may cause the printer to jam.
OFF
Media End Option
Continue
*
When replacing media while printing, select either Continue (print the
remaining data after replacement) or Stop Printing (do not print).
Stop Printing
Btw Pages Nozzle Check
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Using the Control Panel Menu
108
To Next Page
Loading...
Need help?
General