Epson SC-T3100x Series User Manual

Settings item Settings value Explanation
Device Name Set the name of the printer to use on the network.
TCP/IP
Auto
*
Automatically assign the printer IP address using DHCP
functionality in the router.
Manual Select this to manually assign a fixed IP address, then input the IP
address, subnet mask, and other required information.
For details, see the Administrator's Guide.
Proxy Server Use When using a proxy server to directly connect from the intranet to
the Internet so that the printer may directly access the Internet for
firmware updates or similar, select Use, and set the server name and
port number.
Do Not Use
*
IPv6 Address
Enable
*
Select whether to enable or disable the IPv6 function.
Disable
Link Speed & Duplex
Auto
*
Normally, set this to Auto.
10BASE-T Half Duplex
10BASE-T Full Duplex
100BASE-TX Half Duplex
100BASE-TX Full Duplex
Redirect HTTP to
HTTPS
Enable
*
Select whether to enable or disable the function to auto-redirect
HTTP to HTTPS.
Disable
Disable IPsec/IP Fil-
tering
Enable To enable IPsec/IP filtering functionality, use Web Config.
For details, see the Administrator's Guide.
Disable
*
Disable IEEE802.1X Enable To enable IEEE802.1X functionality, use Web Config.
For details, see the Administrator's Guide.
Disable
*
SC-T3100x Series User's Guide
Using the Menu
126

Epson SC-T3100x Series Specifications

General

Brand	Epson
Model	SC-T3100x Series
Category	Printer
Language	English