Epson SC-T3100x Series

Specifications Table
Printer Specifications
Printing method PrecisionCore inkjet technology
Nozzle configura-
tion
800 nozzles x 4 colors
(Black, Cyan, Magenta, Yellow)
((Black, Cyan, Magenta, Yellow)
Resolution (maxi-
mum)
2400 × 1200 dpi
Control code ESC/P raster (undisclosed
command), HP-GL/2, HP RTL
Built-in memory 1.0 GB
Rated voltage AC100-240 V
Rated frequency 50/60 Hz
Rated current 1.4 A
Power consumption
Printing Approx. 22 W
Ready mode Approx. 8 W
Sleep mode Approx. 1.6 W
Power off Approx. 0.2 W
Temperature
Printing 10 to 35 °C (15 to 25°C is
recommended)
In storage (Before
unpacking)
-20 to 60 °C (Within 120 hours at
60 °C, within a month at 40 °C)
In storage (After
unpacking)
-10 to 40 °C (Within a month at
40 °C)
Humidity
Printing 20 to 80% (40 to 60% is
recommended. without
condensation)
In storage 5 to 85% (without condensation)
Printer Specifications
Temperature and humidity range for operating (the
range shown by diagonal lines is recommended)
Dimensions (Width x Depth x Height)
When printing 970 x 577 x 245 mm
(When the optional stand is
installed
*1
: 970 x 980 x 928 mm)
Storage 970 x 577 x 245 mm
(When the optional stand is
installed: 970 x 695 x 928 mm)
Weight
*2
Approx. 29 kg
(When the optional stand is
installed: approx. 40 kg)
*1 With the paper basket open
*2 Not including the ink
c
Important:
Use the printer at an altitude of 2000 m or less.
Interface Specifications
USB port for a com-
puter
SuperSpeed USB
Ethernet
*1
Standards
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
IEEE802.3az (Energy Efficient
Ethernet)
*2
Wi-Fi
SC-T3100x Series User's Guide
Appendix
166