Epson SC-T3100x Series User Manual

How to Set
A
The currently set paper type is shown on the
screen displayed after loading roll paper.
When changing Paper Type
Proceed to step 2.
When setting Paper Remaining without
changing Paper Type
Proceed to step 5.
When not changing either of them
Touch OK. You can start printing once Ready
appears on the screen.
Note:
The settings are confirmed if no operations are
performed for 90 seconds on the above screen. To
change the settings later, touch the Roll paper
information area - Change Paper Type from the
Home screen and then configure the settings.
B
Touch Paper Type.
The following paper type selection screen
appears.
Note:
The three options other than Others display the
most recently selected paper type.
C
Select the paper type that matches the loaded
roll paper.
Epson Special Media
Select the same product name as the one shown
on the package of the paper.
Commercially available non-Epson paper
Select from the following commercially
available paper types.
❏ Plain paper
❏ Coated Paper(Generic)
❏ Photo Paper(Generic)
❏ Tracing Paper
❏ Tracing Paper <LowDuty>
❏ Matte Film
To select a paper type that is not displayed on
the screen, touch Others.
Select a category and select the target paper type.
Note:
If you scroll downward in the category selection
screen, Custom Paper appears. To select custom
paper that has already been registered, touch
Custom Paper.
D
When a paper type is selected, the screen
returns to the one in step 1.
If you will not set the remaining amount
management setting, touch OK.
SC-T3100x Series User's Guide
Loading and Setting the Paper
38

Epson SC-T3100x Series Specifications

General

Brand	Epson
Model	SC-T3100x Series
Category	Printer
Language	English